Estimates

How to Quote Roofing Jobs: Pricing Guide for Roofers

A practical guide to quoting roofing jobs — how to measure in squares, break down materials and labor, handle tear-off and steep-pitch surcharges, and present a quote that wins.

October 24, 2026 Updated November 13, 2026 9 min read

Measure in Squares, Not Square Feet

Roofing is priced in squares: one square is 100 square feet of roof surface. Measure the footprint of the house, then multiply by a pitch factor to get the actual roof area. A 4/12 pitch multiplies by about 1.05, 6/12 by 1.12, 8/12 by 1.20, and a 12/12 pitch by about 1.41.

Then add waste: 10–15% for hips, valleys, and cut-up roof lines. A 2,000 square foot footprint at 6/12 pitch is roughly 22.4 squares of roof, and about 25 squares of material once you account for waste. Missing that difference is a 10% margin error on every job.

The Components of a Roofing Quote

Build the quote from real line items: tear-off and disposal (priced per layer), decking replacement (per sheet of plywood or OSB), synthetic underlayment, ice and water shield in valleys and eaves, drip edge, valley metal, step and counter flashing, pipe boots and vents, ridge vent, shingles, and the dumpster.

Then labor — usually quoted per square, adjusted for pitch and complexity — plus the permit and any inspection fees. Itemizing protects you: when the customer chooses a cheaper bid from a company that skipped the ice and water shield, you can point at the line they're not getting.

Real Price Ranges for Roofing Work

Typical US installed ranges: asphalt shingle reroof $450–$800 per square including tear-off and disposal (roughly $4.50–$8.00 per square foot), architectural shingles at the higher end, metal roofing $900–$1,800 per square, tile and slate $900–$2,000+ per square.

Tear-off costs climb with every layer — a three-layer tear-off can add 30–50% to the labor and nearly double disposal. Overlay jobs (a second layer over the existing roof) look cheap in the quote but cost you the warranty and often the job once the customer reads the fine print.

Run quotes, jobs, invoices, and payments from one app

Operio keeps your customers, quotes, jobs, invoices and payments in one place, so the paperwork happens between jobs instead of after them. There's a free plan to start with — no credit card required.

Surcharges That Protect Your Margin

Add 20–50% for steep pitches (7/12 and up) — more safety gear, slower work, more fatigue. Add for two or more stories, for roofs with lots of valleys, dormers, and penetrations, and for tight access where the dumpster has to be spotted far from the house.

Set a minimum job price of $500–$1,000 for small repairs, add 10–20% for winter work, and always include a change-order clause for rotten decking: 'price assumes sound decking; replacement decking will be billed at $X per sheet, approved before installation.'

Insurance and Storm Work

On storm-damage jobs, document everything with photos and measurements before you quote, and never promise to cover or waive the customer's deductible — that's insurance fraud in most states and puts your license at risk.

Quote retail first, then work the claim. Your inspection documentation is what the adjuster uses, and a well-organized supplement is often the difference between a profitable job and one you lose money on. Note in the file whether the price is an insurance scope or a retail contract.

Deposits, Payment Terms, and What Goes in Writing

Take a 20–30% deposit to order materials, with a progress payment at dry-in on larger jobs and the balance on completion. Put the schedule in the contract, not just the price.

State the workmanship warranty (5–10 years is typical) and pass through the manufacturer's material warranty in writing. Add a price-validity clause of 14–30 days, since shingle prices move — it protects you from quoting in spring and installing in fall.

Winning the Job

The company that quotes first and clearly usually wins. Inspect, then send the quote the same day with photos of the actual damage — cracked pipe boots and curling shingles sell the job better than any sales pitch.

Offer good/better/best (three-tab, architectural, designer) with the warranty length next to each option, and include the timeline: how many days on site, when materials arrive, when the dumpster lands. Then follow up 3–5 days later. Operio (see /roofing-business-software) keeps every open estimate in one place and shows you when the customer has viewed it, so you follow up at the right moment instead of guessing.

Run quotes, jobs, invoices, and payments from one app

Operio keeps your customers, quotes, jobs, invoices and payments in one place, so the paperwork happens between jobs instead of after them. There's a free plan to start with — no credit card required.

Frequently Asked Questions

Run this work in Operio

Quotes, jobs and invoices for this trade, on the phone in your pocket.

Roofing software